Silvercrest SFR 36 A1 Manuel d'utilisateur Page 54

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 62
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 53
52
GB
NOTE: to ensure a consistently smooth
shave, the device must be cleaned and
maintained regularly.
Cleaning after every dry shave
1. Press both release buttons4 and take
off the shaving foil frame2.
2. Tap the shaving foil frame2 carefully.
3. Clean the cutter blocks12 with the
cleaning brush14.
4. Place the shaving foil frame2 on the
device in such a way that it locks into
place.
Cleaning after every wet shave/
occasionally after dry shave
1. If necessary, wipe the device (not the
shaving foils1) with a slightly mois-
tened cloth.
2. Press the release button9. The shaving
head3 opens up.
3. Hold the device facing down and rinse
the cutter blocks12 and the shaving
foil frame2 in the shaving head3 un-
der running water.
4. Allow the parts to dry completely.
Depending on the intensity of usage,
but at least every 6 months, carefully
spread a small amount of sewing ma-
chine oil on the shaving foils1, the cut-
ter blocks12 and the long hair
trimmer11.
8. Storage
DANGER! Keep the device out of
the reach of children.
When the device is not being used,
place the protective lid10 on the shav-
ing head3.
The device and accessories can be
stored in the storage bag15.
9. Replacing shaving
foils/cutter blocks
WARNING! Do not use the device if the
shaving foils1 are damaged.
NOTE: replacement shaving foils and cut-
ter blocks can be ordered:
- on www.hoyerhandel.com
- or at the service centre hotline (chapter
"Warranty of HOYER Handel GmbH" on
page 55)
The shaving foils
1
and the cutter blocks
12
must be replaced, …
when you can see signs of damage,
when you feel pinching when shaving
or if the shave is not close, and if this is
not remedied by oiling of the shaving
foils1 and the cutter blocks12 (see
chapter "Cleaning and maintenance of
the device" on page 51) and
depending on the intensity of use, but
generally after one year.
1. Figure A: press both release but-
tons4 and take off the shaving foil
frame2.
2. Press the release button9. The shaving
head3 opens up.
GB_KRA100057_Herrenrasierer.fm Seite 52 Dienstag, 27. Mai 2014 2:50 14
Vue de la page 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60 61 62

Commentaires sur ces manuels

Pas de commentaire