Silvercrest SUP 128 A1 Instructions d'exploitation télécharger pdf (Page 44)

SUP 128 A1

♦ Move the pickup arm lever to the rear position to raise the pickup arm.

♦ Swing the pickup arm to the desired position on the record. The turntable

starts to rotate.

♦ Move the pickup arm lever to the forward position to lower the pickup

arm and to place the stylus

onto the record.

♦ Control the volume on the connected ampliﬁ er.

♦ If you want to pause the playback, use the lever to raise the pickup arm.

♦ Press the EJECT button to stop playback and return the pickup arm

automatically to the arm rest.

NOTE

►

At the end of the record, the pickup arm automatically returns to its starting

position and the turntable switches oﬀ .

Fine adjustment of the rotation speed

The stroboscope beams a blue ﬂ ashing light onto the edge of the turntable.

While the turntable

is turning, this light will be reﬂ ected and you can see a

dashed line on the edge of the turntable. Use the PITCH ADJ. controller

ﬁ ne-tune the rotation speed:

- The upper dashed line on the edge of the turntable is used for setting the rota-

tion speed to 33 ⅓ rpm.

- The middle dashed line on the edge of the turntable is used for setting the rotation

speed to 45 rpm.

- The rotational speed is correctly set when the dashed line can be seen ﬁ rmly in

one position.

♦ If the dashes move towards the left the rotational speed is too high.

Slide the PITCH ADJ. control to the rear in the direction "−".

♦ If the lines move towards the right, push the PITCH ADJ. control forwards in

the direction "+".

IB_60308_SUP128A1_LB1.indb 41 08.04.14 09:30

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 54 55

Pas de commentaire

Silvercrest SUP 128 A1 Instructions d'exploitation Page 44