Silvercrest SRW 250 A2 Manuel d'utilisateur télécharger pdf (Page 75)

SRW 250 A2 Alarm Clock Radio

English - 73

Tuning to a Station

 Power the device on by pressing the ON/OFF-FM/AUX button [2].

 The current frequency is shown briefly on the display [10]. As soon as

the current time is shown, you can press the – [7] or + [8] buttons to

adjust the volume.

 Press the ON/OFF-FM/AUX button [2] briefly. As soon as the current

frequency is shown, you can press the – [7] or + [8] buttons to set the

desired frequency manually.

 To search for a station automatically, press and hold the – [7] or +

[8] button. The currently-tuned frequency is indicated in MHz. Any

frequencies with 0.05 MHz are shown by means of the 0.05 LED

[19]. If required, move the wire antenna into a different position or

move the device to improve reception.

 You can save a station by pressing and holding the PRESET button [6]

for approx. 1-2 seconds.

 “P” flashes on the display [10], followed by a number between 01

and 20.

 Press – [7] or + [8] to select the station preset you want.

 Press the PRESET button [6] again to save the current station to the

selected preset.

Automatic Station Search

If you do not want to set the stations manually, you can have the device

search for them automatically. Proceed as follows:

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 117 118

Pas de commentaire

Silvercrest SRW 250 A2 Manuel d'utilisateur Page 75