Silvercrest SKF 2800 A1 Manuel d'utilisateur télécharger pdf (Page 66)

64

4.8 Handling batteries

Warning!

To prevent a risk of explosion,

normal batteries must not be

charged, heated or disposed of by

burning.

• Never try to open the batteries.

To prevent injury if battery acid has

leaked out, avoid contact with the skin,

eyes and mucous membranes. In the

event of contact with the acid, rinse the

affected areas immediately with plenty

of clean water and contact a doctor at

once.

Caution! To avoid damaging the

appliance and to ensure it functions

correctly, please note:

• Only use type AG13 batteries.

5. Before using for the first time

1. Please clean the individual parts of the

deep-fat fryer thoroughly (see

“9. Cleaning and storing” on page 67).

2. Then carefully dry the individual parts.

6. Before frying

1. Place the deep-fat fryer on a level and

stable surface.

2. Unwind the mains cable completely.

Caution! Make sure that the cable does

not come into contact with the hot parts of

the fryer so that it is not damaged.

3. Press the unlock button 7 to release the lid.

The lid 4 will open.

4. Move up the handle of the frying

basket 1 until it audibly engages.

5. Remove the frying basket 14.

6.1 Add the oil or fat

You should either use liquid frying oil or

solid frying fat.

You should melt solid frying fat in a frying

pan or saucepan before adding it to the

fryer.

Note: Never mix different types of fat or oil!

1. Add oil or melted fat up to the upper

"MAX" marking of the fat container 13

in the dry and empty fryer.

Note: If you only want to fry small

quantities, a bit less oil or fat may well

be enough. However the items to be

fried must always be completely covered

and the fat or oil must reach at least as

far as the lower "MIN" marking of the fat

container 13.

2. Insert the plug in a socket.

6.2 Melt existing fat

If the fryer already contains solidified fat

from an earlier frying session, it must be

melted in the fryer. Do this very carefully so

that the melting fat does not start to spit or

the fryer does not overheat.

1. Insert the plug in a socket.

RP95885 Fritteuse LB1 Seite 64 Montag, 17. Februar 2014 2:24 14

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 72 73 74

Commentaires sur ces manuels

Pas de commentaire